Home-4.0 / Products / Environmental Test Chamber/ Temperature & Humidity Test Chamber / Four-cabin Constant Temperature Humidity Chamber

Four-cabin Constant Temperature Humidity Chamber

The high and low temperature charge and discharge test system is a high-precision and high-performance battery tester and a high and low temperature test chamber integrated design model. Set parameters in the controller or computer software to charge and discharge various batteries. It is used to test battery capacity, voltage, and current. Battery cycle testing can be performed. High precision (the default value is 1‰ accuracy) and stable performance. Single-point control, charge and discharge test uses a constant current source and a constant voltage source dual closed loop control. It is connected to the computer via Ethernet, which is convenient and flexible, and more chamber can be added at any time through a switch.Using a compressor, a controller can control the four compartments independently.The area of 2085 * 1840mm, compared with the traditional double-layer chambers saving 41%, 135% compared with the traditional single-layer chambers,Compared with ordinary chambers, the power consumption is only 68% at 20℃, and 50% at 25℃ and 45℃.

Model:
DBT4-B288D1
Brand:
danble

Availability:

Quantity:



Inquire Add to Basket

Product Description

Product model	DBT4-B288D1
Volume	4*288L
Internal dimensions	4800600600 (WD*H) mm
External dimensions	208518401920 (WDH) mm
Air duct structure	Left and right horizontal air supply
Temperature range	-40℃ ~ + 120℃
Temperature fluctuation	Internal air constant stage: 0.5℃ Partial constant and partial temperature variable stage: ±0.5℃
Temperature uniformity	Full range ranged from 1.5 to 2.0℃
Temperature departure	≤±2.0℃
Heating rate	Single cabin: -40℃ ~ + 100℃, 2℃ / min (with 40kg steel ·) loaded
Cooling rate	1. + 25℃ ~ -40℃, the four-cabin chamber was cooled synchronously and decreased to-39℃, 75 points in 65 minutesBell balance (no-load) 2. Maximum limit constant working condition: three warehouse -40℃, one warehouse-35℃ (with load 40kg of steel) 3. Recommended limit with load conditions: warehouse -40℃, warehouse -30℃ (with load 40kg of steel)
Chamber connection	φ100mm * 4
Installed power	35kW
Peak power	10kW
Cooling-down method	Hydrocooling
Specimen holder	Single warehouse: load-bearing 50 KG / layer * 2
	An average of 65dB at 1 m ahead

Four-cabin Constant Temperature Humidity Chamber

RELATED PRODUCTS

PRODUCT CATEGORY

QUICK LINKS

CONTACT US